Micronics PCI/ISA System Board D6-IN Informacje Techniczne Pobierz pdf (Strona 53)

Twister LX System Board Manual

Chapter 4: The BIOS Setup Utility

Integrated Peripherals

This option sets the addresses of I/O subsystems that

depend on the integrated peripherals controller in your

system. To access the INTEGRATED PERIPHERALS

screen, highlight this option on the main menu screen

and press <Enter>.

Figure 4-8: Integrated Peripherals Configuration Screen

IDE HDD Block Mode

Block mode is also called block transfer, multiple com-

mands, or multiple sector read/write. If your IDE hard

drive supports block mode (most new drives do), select

Enabled (default) for automatic detection of the optimal

number of block read/writes per sector the drive can

support.

IDE Primary/Secondary Master/Slave PIO

The four IDE PIO (Programmed Input/Output) fields

allow you to set a PIO mode (0-4) for each of the four IDE

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 85 86

Brak uwag

Micronics PCI/ISA System Board D6-IN Informacje Techniczne Strona 53